How To Put Nebulizer Together in Easy-To-Follow Steps

A nebulizer is a medical device that delivers medicines in the form of mist.

Its purpose is to help control respiratory symptoms, such as breathing difficulty, congestion, and lung secretions.

If it’s your first time using this machine, one of the things you should know about is how to put nebulizer together.

What if you don’t want to bother with any of its bells and whistles? If so, you can get a portable nebulizer instead, such as this one from ProNebu.

How To Put Nebulizer Together

Setting up a nebulizer is incredibly easy.

Even so, you have to be careful not to damage any part during the assembly. This will ensure that your device will function properly.

Step 1: Wash your hands.

Let’s start with the basics. Make sure that your hands are clean before setting up the nebulizer for use

Wash your hands with warm water and soap for 20 seconds to get rid of germs and bacteria.

Whether you’re administering the medication to yourself or somebody else, clean hands prevent contamination.

Rinse your hands and dry them off with a clean cloth or paper towel after.

Step 2: Wash and sterilize the parts.

You also want to make sure that your nebulizer is clean before use.

Cleaning and disinfecting a nebulizer unit is easy. Simply wash the nebulizer cup with warm water and mild detergent.

Then, rinse well and let dry.

To disinfect the nebulizer parts, you can use an electric steam sterilizer or a baby bottle sterilizer.

Alternatively, you can submerge it in hot water for five minutes or put it in the dishwasher.

If you’re using a disposable nebulizer, follow the cold disinfecting method.

For example, you can soak it in a bowl of water-vinegar solution. To do this, simply mix one cup of vinegar with three cups of water.

You can also soak the neb cup and mouthpiece in isopropyl alcohol for five minutes or in 3% hydrogen peroxide for half an hour.

Once done, rinse well and air dry.

Step 3: Put the medication in the nebulizer cup.

The next step on how to put nebulizer together is to assemble the parts.

Start by filling the neb cup with your medication. Every nebulizer has a fluid reservoir in which you place the medicine.

The amount of medicine you put depends on your doctor’s prescription.

Make sure to follow the exact doses. Do not attempt to lessen or double the dose as it could have unwanted effects.

Most types of respiratory medications for nebulizer therapies come pre-measured. This is called a unit dose vial.

Medications can include inhaled antibiotics, glucocorticoids, Albuterol, and anticholinergics.

It’s best to have at least a teaspoon (3ml to 4ml) of medicine to make a good mist.

If you use two or more types of medicine, ask your healthcare provider if they can be mixed.

If you’re unsure, do not attempt to mix.

After pouring the liquid drug, secure the top tightly to prevent it from spilling out.

tips on how to put nebulizer together

Step 4: Attach the mouthpiece. 

Attach the hose and the mouthpiece to the medicine cup.

While nebulizers vary in design, most mouthpieces are attached to the top of the medicine cup.

Some nebulizers come with facemasks instead of a mouthpiece.

Step 5: Connect the tubing.

Attach one end of the tubing to the nebulizer cup and the other end to the air compressor machine.

Place the air compressor machine on a flat, hard surface, such as a clean table.

Do not place it on the floor as dust and allergens from the floor may be drawn into the machine.

Also, do not put it on a soft surface like a couch where the ventilation slots may be blocked, leading to overheating.

Step 6: Plug the air compressor.

Place the air compressor machine on a flat, hard surface, such as a clean table.

Do not place it on the floor as dust and allergens from the floor may be drawn into the machine.

Also, do not put it on a soft surface like a couch where the ventilation slots may be blocked, leading to overheating.

Step 7: It’s ready for use.

You should use the nebulizer while sitting, allowing you to take deeper breaths and get more medicine into your lungs.

If using a mouthpiece, place it in your mouth. Close your lips around it so that no mist leaks out.

Then, hold the nebulizer cup upright to prevent the medicine from spilling out. Take slow, deep breaths and do this until there is no more mist.

It can take anywhere from 10 to 20 minutes, depending on the machine and the medicine dose.

Step 8: Storing Your Nebulizer

After use, disconnect the nebulizer cup and mouthpiece from the tubing and wash them.

If you do not keep your equipment clean, mold and bacteria can grow on it.

Then, when you use it the next time, mold spores can get into your lungs and cause an infection.

Next, wipe the air compressor machine with a damp cloth or a disinfecting wipe.

Check the manufacturer’s instructions for cleaning and care of the air compressor. Make sure that it’s unplugged before cleaning it.

Do not store until all the parts are completely dry. You can put them on a paper towel or clean, dry cloth for several hours before storing them.

Dedicate a sealed container or bag for your nebulizer so that it stays clean and protected from dust and allergens until your next use.

Don’t forget to store your medicines properly. Store them in a cool, dry place, and follow the storage instruction as indicated on the label.

Lastly, check your medicines often. If they have changed color or appearance or formed crystals, throw them away.

ProNebu Nebulizer – Your Go-to Portable Nebulizer

pronebu for blog

If you’re always traveling, investing in a portable nebulizer that requires no tubing or air compressor to work might be a good idea.

The ProNebu Portable Nebulizer is a handheld device that is ultra-quiet and highly portable.

It’s suitable for young and older people, is noise-free, and is easy to use. It also doesn’t require being plugged into an electrical socket.

The device works with either USB or batteries, allowing you to use it anytime, anywhere.

You’re All Set!

As you can see, learning how to put a nebulizer together is easy.

Essentially, all you have to do is attach the nebulizer cup to the mouthpiece and then connect them to the air compressor via the tubing.

Again, make sure everything is clean and that you’re using the machine with clean hands.

Once all set up, your machine is ready to be used.

Alternatively, you can get a no-nonsense machine you can take with you anywhere, like the ProNebu Portable Nebulizer.

Leave a Comment